GF Preston LTD. New and Used Inventory

Doosan 60" clean up bucket with inside space 13 1/4" ID 80mm, and pin to pin distance apart 18 1/4"

Geith 36" clean up bucket inside width is 5 1/2", pin size 35mm, pin distance is 8"

NM 58" Skeleton Bucket with 12" spacing inside pins, pin diameter 80mm, 17 3/4 pin to pin,

Tag 30" Tooth Bucket Inside space 5.5" inside diameter 40mm, space between pins 8.35"

42" Hydraulic tilt ditching bucket with a 45mm pin size. Made to fit a DX50z-7

2 Tine Hydraulic thumb fits a DX62R-7 Length from center pine to Hydraulic pin 39", Pin size 45mm, thumb width 7 1/4" inside diameter for pin 11 1/16" outside Pin 15 3/4", pin to thumb 36"

Develon 24" HD Tooth Bucket with 45 pins fits a DX55R-7

Develon 30" Heavy Duty tooth Bucket with 45mm pins Fits a DX62R-7 See second picture for pin information

Develon 30" HD Tooth Bucket with 45mm pins fits DX89R-7

4 tine hydraulic thumb fits a DX255LC-7 86" long, 80mm pin size, top end 27 1/4" inside bottom 22", to outside 32 3/4", center to top of thumb 74"

Develon 48" Ditching bucket 45mm pins fits DX62R-7

48" Hydraulic Tilt Ditching Bucket with 45mm pins fits a DX89R-7

Develon 60" Hydraulic Tilt ditching Bucket 80 mm pins for a DL220-7

66" Heavy Duty Ditching Bucket taking 80mm pins fits a DX225LC-7

Doosan 42" HD Tooth Bucket, Pin inside width 13 1/4", ID 80mm, Pin to Pin distance is 18 1/2"

New GRYB 36" HD Tooth Bucket, inside width 10 1/4", inside diameter 65mm Pin to pin 16 1/2"

Case 24" Tooth Bucket with inside 10MM, Outside to inside 5 1/2", inside diameter 50 mm pin to pin 14 1/2"

Develon 24" QH TAG Tooth Bucket pin size 45mm from a DX50Z-7

72" Heavy Duty Ditching Bucket with 100mm pins from a DX350LC-5 or DX350LC-7