Case compact wheel loaders offer Versa-Boom linkage for excellent reach, visibility and precise parallel lift. Get greater material retention with increased bucket roll back. A comfortable cab keeps you in the seat longer. For fast daily checks, you have easy access to service points at ground level. These machines are ideal for landscaping, industrial material handling and residential construction applications.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
221E Models
MSRP
Request a Quote
DIMENSIONS
Length w/Bucket
220.5 in. (5,600 mm) bucket level on ground
Height
To Top of ROPS Cab: 110.7 in. (2,813 mm) Operating Height - Fully Raised with Spillguard: 172 in. (4,369 mm)
Width
Centerline Tread: 60.1 in. (1,526 mm)
Width w/o Bucket
75 in. (1,904 mm)
Weight
Operating Weight - Versa-Boom: 11,947 lbs. (5,419 kg) with ROPS cab with heater, standard counterweight, 365/80 R20 Dunlop tires, front and rear fenders, 1.18 cu. yd. (0.9 cu. m) general purpose loader bucket with edge, full fuel, 165 lb. (75 kg) operator Operating Weight with Optional Counterweight - Versa-Boom: 12,268 lbs. (5,564 kg) Bucket: 919 lbs. (417 kg)
Wheelbase
92.5 in. (2,350 mm)
Ground Clearance
Under Shaft: 16 in. (415 mm) Under Axles: 13 in. (330 mm)
Turning Radius
Outside: 161.2 in. (4,095 mm) with 365/80 R20 tires
DRIVETRAIN
Transmission Type
Hydrostatic transmission
Number of Speeds
2
Axles
Front Axle: Differential Ratio: 3.66 Planetary Ratio: 6 Final Axle Ratio: 22
ENGINE
Engine Type
4-stroke
Engine Make
Case
Engine Model
432T/M3
Fuel Type
#2 diesel, direct fuel injection with replaceable, full flow spin-on cartridge fuel filter
Bore x Stroke
3.89 x 4.09 in. (99 x 104 mm)
Cylinders
4
Gross Horsepower
74 hp (55 kW) @ 2,500 rpm, rated (per ISO 9249)
Net Horsepower
69 hp (51 kW) @ 2,500 rpm, rated (per ISO 9249)
Displacement
195 ci (3.2 l)
Torque
Gross: 203 ft. lbs. (275 Nm) @ 1,400 rpm (per ISO 9249) Net: 200 ft. lbs. (271 Nm) @ 1,400 rpm (per ISO 9249) Torque Rise: 30%
Cooling
Oil
Fuel Tank Capacity
26 gal. (100 l)
Rated Speed
2,500 rpm, full load Low Idle: 900 - 950 rpm High Idle, No Load: 2,580 - 2,680 rpm
Straight: 9,416 lbs. (4,271 kg) Straight with Optional Counterweight: 9,991 lbs. (4,532 kg) 20° Turn: 8,056 lbs. (3,654 kg) 20° Turn with Optional Counterweight: 8,544 lbs. (3,875 kg)
Digging Depth
3.2 in. (82 mm)
Bucket Capacity
Struck: 0.85 cu. yd. (0.65 cu. m) Heaped: 1.18 cu. yd. (0.90 cu. m)
Bucket Width
Outside: 80.7 in. (2,050 mm)
Height to Bucket Pin
Fully Raised: 133.3 in. (3,386 mm)
Dump Height
Fully Raised, 45° Dump: 103.2 in. (2,622 mm)
Dump Reach
Fully Raised, 45° Dump: 33.2 in. (843 mm) 7 Ft. (2.13 m) Height, 45° Dump: 48.7 in. (1,238 mm)
Dump Angle
Fully Raised: 45° Maximum Grading Angle with Bucket – Back Dragging: 107°
Bucket Breakout Force
10,189 lbs. (4,622 kg) with tilt cylinder
Bucket Rollback
Ground: 45° Carry Position: 51° At Maximum Reach: 54° At Full Height: 54°
Lifting Force
Full Height: 5,768 lbs. (2,616 kg) Maximum Reach: 7,836 lbs. (3,554 kg) Ground: 11,175 lbs. (5,069 kg)
Total Cycle Time
Raise with Rated Bucket Load: 6 sec. Dump with Rated Bucket Load - Versa-Boom: 1 sec. Lower (empty) - Float Down: 3 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Home
Specs, Quotes, Overview
100.jpg)
