If you’re facing big material moving jobs, you need a wheel loader with superior stability, traction, push power and lift capacity. You also need a cab that keeps your operator comfortable all day – and equipment that’s easy to maintain and fuel efficient. Meet the 30 metric ton 1221E wheel loaders from Case. These powerhouses give you the extra muscle to get the job done right.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
1221E Z-Bar Series
MSRP
Request a Quote
DIMENSIONS
Height
To Top of ROPS Cab: 151 in. (3.84 m) To Drawbar: 46 in. (1.19 m)
Width
Centerline Tread: 96 in. (2.44 m)
Width w/o Bucket
Overall (over tires): 128.9 in. (3.27 m) with 29.5 x 25 XHA tires
Weight
66,930 lbs. (30,360 kg) with ROPS cab with heater and A/C, counterweight, 29.5 x 25 XHA tires, wide front and rear fenders, 7.6 cu. yd. (5.7 cu. m) general purpose loader bucket, full fuel, 175 lb. (79 kg) operator
Wheelbase
146 in. (3.7 m)
Ground Clearance
20 in. (510 mm)
Turning Radius
Outside: 298.6 in. (7.59 m) with 29.5 x 25 XHA tires Turning Angle: From Center: 40° Total Angle: 80°
Tank Capacity
Transmission - Service with Filter: 11.4 gal. (43 l) Front & Rear Axle (without coolers): 15.9 gal. (60 l) Engine Oil with Filter: 9.8 gal. (37 l) Cooling System: 17.2 gal. (65 l)
DRIVETRAIN
Transmission Type
4F / 3R proportional with Electronic Control Module torque sensing auto shift / manual shift and modulation
Axles
Front and Rear Axles: Differential Ratio: 4.25 Planetary Ratio: 6.35 Final Axle Ratio: 27 Differential: Limited slip with 30% transfer on front axle and 45% transfer on rear axles Rear Axle Oscillation: 26° total
ENGINE
Engine Type
4-stroke, turbocharged
Engine Make
Cummins
Engine Model
QSM 11, Tier III certified
Fuel Type
#2 diesel, electronic fuel injection with replaceable, full flow
spin-on cartridge fuel filter
Bore x Stroke
4.92 x 5.79 in. (125 x 147 mm)
Cylinders
6
Horsepower
Peak: 365 hp (272 kW) @ 1,800 rpm Gross hp and torque per SAE J1995 Net hp and torque per SAE J1349
Gross Horsepower
Rated: 335 hp (250 kW) @ 2,200 rpm
Net Horsepower
Rated: 320 hp (239 kW) @ 2,200 rpm
Displacement
660 ci (10.8 l)
Torque
Peak: 1,235 ft. lbs. (1,674 Nm) @ 1,400 rpm Torque Rise: 40% standard power
At Ground: 41° At Carry Position: 47° At Maximum Reach: 63° At Full Height: 63°
Total Cycle Time
Raise with Rated Bucket Load: 6.4 sec. Dump with Rated Bucket Load: 1.4 sec. Lower (empty): Power Down: 3.5 sec. Float Down: 3 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Home
Specs, Quotes, Overview
100.jpg)
