SUPERIOR PRODUCTIVITY, EFFICIENCY, COMFORT AND SERVICEABILITY
Our ergonomically designed cab provides operator comfort for increased productivity. The enhanced Tier III certified power moves more material per hour. Extra work modes match the machine operation to the task at hand for lower operating costs and increased productivity. Best-in-class maintainability means easy daily service. The easier service is to perform, the more likely it will get done.
Challenging wheel loader applications require stability, superior traction, push power, lift capacity and quiet, fuel-efficient operation.
The E Series wheel loaders are loaded with innovative features and backed by
Case durability and customer support.
Spacious cabs provide comfort, visibility and an all-around command of the work site. Robust horsepower and pressure-compensating hydraulics deliver superior breakout force and lift capacity. Industry-leading ease of maintenance assures maximum uptime. The Case-exclusive mid-mount cooling module makes these wheel loaders fuel efficient and reliable for years to come, even in the dustiest environments.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
721E Z-Bar Series
MSRP
Request a Quote
DIMENSIONS
Height
To Top of ROPS Cab: 134 in. (3,404 mm)
Width
Centerline Tread: 79.9 in. (2,029 mm)
Width w/o Bucket
Overall: 100.9 in. (2,562 mm)
Weight
30,644 lbs. (13,900 kg) with ROPS cab with heater and A/C, full counterweight, 20.5R25 XTLA Michelin tires, front and rear fenders, 3 cu. yd. (2.3 cu. m) general purpose loader bucket with edge, full fuel, 175 lb. (79 kg) operator
Wheelbase
128.1 in. (3,253 mm)
Ground Clearance
14.4 in. (365 mm)
Turning Radius
Outside: 226.4 in. (5,750 mm) with 20.5R25 Michelin XTLA tires Turning Angle: From Center: 40° Total Angle: 80°
Tank Capacity
Transmission - Service with Filter: 6.75 gal. (25.6 l) Front Axle: 32 qt. (30.3 l) Rear Axle: 29 qt. (27.4 l) Engine Oil with Filter: 15 qt. (14.2 l) Cooling System (-40): 39 qt. (36.9 l)
DRIVETRAIN
Transmission Type
4F / 3R proportional with Electronic Control Module torque sensing auto shift / manual shift and modulation
Axles
Front Axles: Differential Ratio: 3.364 Planetary Ratio: 6.000 Final Axle Ratio: 20.18 Rear Axle: Differential Ratio: 3.182 Planetary Ratio: 6.400 Final Axle Ratio: 20.36 Differential: Limited slip on front and rear axles Rear Axle Oscillation: 24° total
ENGINE
Engine Type
4-stroke, turbocharged
Engine Make
Case Family IV
Engine Model
667TA/EED, Tier III certified
Fuel Type
#2 diesel, electronic fuel injection with replaceable, full flow
spin-on cartridge fuel filter
Bore x Stroke
4.09 x 5.2 in. (104 x 132 mm)
Cylinders
6
Horsepower
Gross hp and torque per SAE J1995 Net hp and torque per SAE J1349
Gross Horsepower
Max Power: 195 hp (145 kW) @ 2,000 rpm Standard Power: 182 hp (136 kW) @ 1,900 rpm Economy Power: 157 hp (117 kW) @ 1,500 rpm
Net Horsepower
Max Power: 183 hp (137 kW) @ 2,000 rpm Standard Power: 172 hp (128 kW) @ 1,800 rpm Economy Power: 149 hp (111 kW) @ 1,500 rpm
Displacement
411 ci (6.7 l)
Torque
Max Power: Gross: 636 ft. lbs. (862 Nm) @ 1,400 rpm Net: 605 ft. lbs. (821 Nm) @ 1,400 rpm Standard Power: Gross: 625 ft. lbs. (847 Nm) @ 1,400 rpm Net: 596 ft. lbs. (809 Nm) @ 1,300 rpm Economy Power: Gross: 614 ft. lbs. (832 Nm) @ 1,200 rpm Net: 590 ft. lbs. (800 Nm) @ 1,200 rpm Torque Rise: 31.4% standard power @ 2,000 rpm
55° fully raised Maximum Grading Angle with Bucket - Back Dragging: 60°
Bucket Rollback
At Ground: 40° At Carry Position: 43° At Maximum Reach: 54° At Full Height: 57°
Total Cycle Time
Raise with Rated Bucket Load: 5.59 sec. Dump with Rated Bucket Load: 1.8 sec. Lower (empty): Power Down: 3.29 sec. Float Down: 3.29 sec.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.