| Manufacturer |
|
Case Construction |
|
|
| Model Year |
|
2010 |
|
|
| Model |
|
CX75 Models |
|
|
| MSRP |
|
Request a Quote
|
|
|
| DIMENSIONS | |
| Length |
|
19 ft. 5 in. (5.92 m)
Without Attachment: 10 ft. 9 in. (3.28 m) |
|
|
| Height |
|
Overall and Cab: 8 ft. 10 in. (2.70 m) |
|
|
| Width |
|
Upperstructure: 7 ft. 4 in. (2.23 m) |
|
|
| Weight |
|
Operating: 17,468 lbs. (7,919 kg) with 5 ft. 7 in. (1.71 m) arm, 17.7 in. (450 mm) track shoes, 460 lb. (210 kg) bucket, 165 lb. (75 kg) operator, full fuel and standard equipment |
|
|
| Ground Clearance |
|
Upperstructure: 2 ft. 5 in. (0.75 m)
Minimum: 1 ft. 2 in. (0.36 m) |
|
|
| Turning Radius |
|
Maximum Dig Radius: 21 ft. 5 in. (6.52 m)
Dig Radius at Groundline: 21 ft. (6.39 m) |
|
|
| Fuel Tank Capacity |
|
26 gal. (100 l) |
|
|
| Hydraulic Tank Capacity |
|
Refill: 13 gal. (50 l)
Total System: 26 gal. (97 l) |
|
|
| DRIVETRAIN | |
| Transmission Type |
|
Travel Motor (2): 2-speed axial piston design
Final Drive: Planetary gear reduction
Drawbar Pull: 13,331 lbs. (59 kN) |
|
|
| Transmission Speed |
|
Swing: 0-9.5 rpm |
|
|
| Track Length |
|
9 ft. 4 in. (2.85 m) |
|
|
| Track Width |
|
7 ft. 7 in. (2.32 m) with 17.7 in. (450 mm) shoes |
|
|
| ENGINE | |
| Engine Type |
|
4-stroke turbocharged |
|
|
| Engine Make |
|
Isuzu |
|
|
| Engine Model |
|
AU-4LE2X |
|
|
| Net Horsepower |
|
54 hp (40 kW) @ 2,000 rpm (per SAE J1349) |
|
|
| Displacement |
|
133 ci (2,179 cc) |
|
|
| Bore x Stroke |
|
3.35 x 3.78 in. (85 x 96 mm) |
|
|
| Cylinders |
|
4 |
|
|
| Torque |
|
155 ft. lbs. (210 Nm) @ 1,500 rpm |
|
|
| Fuel Type |
|
Diesel, direct fuel injection with mechanical fuel injection pump |
|
|
| Cooling |
|
Liquid |
|
|
| Rated Speed |
|
2 auto shift high to low, forward / reverse |
|
|
| Rated Speed - High |
|
3.2 mph (5.1 km/h) |
|
|
| Rated Speed - Low |
|
2.1 mph (3.4 km/h) |
|
|
| BATTERY | |
| Voltage |
|
12V negative ground
1 low-maintenance 64 Ah (5 hr. rate) battery |
|
|
| Amps |
|
Alternator: 50A |
|
|
| HYDRAULICS | |
| System Relief Pressure |
|
Standard: 4,264 psi (29.4 MPa)
Pilot Control Hydraulic System: 609 psi (4.2 MPa) |
|
|
| Hydraulic Cylinders |
|
1 Boom:
Bore Diameter: 4.3 in. (110 mm)
Rod Diameter: 2.8 in. (70 mm)
Stroke: 35.9 in. (911 mm)
1 Arm:
Bore Diameter: 3.7 in. (95 mm)
Rod Diameter: 2.4 in. (60 mm)
Stroke: 31.4 in. (797 mm)
1 Bucket:
Bore Diameter: 3.3 in. (85 mm)
Rod Diameter: 2.2 in. (55 mm)
Stroke: 26.2 in. (665 mm) |
|
|
| Pumps |
|
2 variable displacement axial piston design
Maximum capacity of 2 x 18 gpm (68 lpm)
1 gear design pilot control hydraulic system
Maximum capacity of 5.7 gpm (21.4 lpm) |
|
|
| OPERATIONAL | |
| Arm Length |
|
5 ft. 7 in. (1.71 m) |
|
|
| Arm Weight |
|
Bare: 308 lbs. (140 kg)
Bucket Cylinder Linkage & Plumbing: 254 lbs. (115 kg)
Total: 562 lbs. (255 kg) |
|
|
| Dig Depth |
|
13 ft. 7 in. (4.14 m)
8 ft. (2.44 m) Level Bottom: 12 ft. 6 in. (3.81 m)
Vertical Straight Wall Dig Depth: 11 ft. 11 in. (3.64 m) |
|
|
| Bucket Reach |
|
Height: 24 ft. 1 in. (7.33 m) |
|
|
| Bucket Digging Force |
|
12,792 lbs. (56.9 kN)
Arm Digging Force: 8,610 lbs. (38.3 kN) |
|
|
| Dump Height |
|
17 ft. 3 in. (5.25 m) |
|
|
| Boom Length |
|
12 ft. 8 in. (3.87 m)
Offset: 12 ft. 10 in. (3.92 m) |
|
|
| Boom Weight |
|
Boom with Arm Cylinder & Plumbing: 1,085 lbs. (492 kg)
Hoist Cylinders (1): 227 lbs. (103 kg) ea.
Total: 1,312 lbs. (595 kg)
Offset Boom with Arm Cylinder & Plumbing: 1,989 lbs. (902 kg)
Offset Hoist Cylinders (1): 227 lbs. (103 kg) ea.
Offset Total: 2,216 lbs. (1,005 kg) |
|
|
| Boom Swing Radius |
|
Tail Swing Radius: 4 ft. 1 in. (1.24 m)
Minimum Swing Radius: 5 ft. 10 in. (1.79 m) |
|
|
Home
Specs, Quotes, Overview
100.jpg)
