Over 50 Years in Business!
Visit our Doosan Exclusive Site Visit our Case Exclusive Site
Browse our New Equipment Browse our Used Equipment
Browse our Rental Equipment Browse our Online Catalogs



2010 Case Construction CX290B Models
  Specs, Quotes, Overview
  Standard Features
  Options
  Print a Brochure
  Compare 2 Models
  Return To List
        Request a Quote
MORE PROFIT PER JOB.

Thanks to advanced design and engineering, Case excavators deliver up to 17 percent more horsepower and save an estimated $10,000 per year from lower fuel costs and faster cycle times. Four minimum swing radius models excel at digging and lifting in the tightest work areas. Case excavators range from 1.7 to 80 metric tons. These excavators are designed for high performance and durability. Whatever your job, Case has an excavator that is right for you.

CX290B offers increased horsepower by 14 percent and increased hydraulic horsepower by 11 percent to manage even the most challenging applications. From trenching to demolition to slinging material, the added power increases the versatility of the CX290B.

 GENERAL INFORMATION
 Manufacturer  Case Construction
 Model Year  2010
 Model  CX290B Models
 MSRP  Request a Quote
 DIMENSIONS
 Length  34 ft. 5 in. (10.47 m)
Without Attachment: 18 ft. 4 in. (5.59 m)
 Height  Overall: 11 ft. 4 in. (3.46 m)
Cab: 10 ft. 1 in. (3.07 m)
 Width  Upperstructure: 9 ft. 5 in. (2.87 m)
 Weight  Operating: 65,984 lbs. (29,930 kg) with 31.5 in. (800 mm) track shoes, 1,777 lb. (806 kg) bucket, 165 lb. (75 kg) operator, full fuel and standard equipment
 Ground Clearance  Upperstructure: 3 ft. 11 in. (1.19 m)
Minimum: 1 ft. 7 in. (0.47 m)
 Turning Radius  Maximum Dig Radius: 36 ft. 7 in. (11.16 m)
Dig Radius at Groundline: 36 ft. 1 in. (10.99 m)
 Fuel Tank Capacity  118.9 gal. (450 l)
 Hydraulic Tank Capacity  Refill: 38.8 gal. (147 l)
Total System: 79.3 gal. (300 l)
 DRIVETRAIN
 Transmission Type  Travel Motor (1): 2-speed axial piston design
Final Drive: Planetary gear reduction
Drawbar Pull: 52,425 lbs. (233 kN)
 Transmission Speed  Swing: 0-10.2 rpm
 Track Length  15 ft. 11 in. (4.85 m)
 Track Width  11 ft. 2 in. (3.40 m) with 31.5 in. (800 mm) shoes
 ENGINE
 Engine Type  4-stroke, turbocharged
 Engine Make  Isuzu
 Engine Model  6HK1YSS, Tier III certified
 Net Horsepower  207 hp (154 kW) @ 1,800 rpm (per SAE J1349)
 Displacement  475 ci (7,800 cc)
 Bore x Stroke  4.53 x 4.92 in. (115 x 125 mm)
 Cylinders  6
 Torque  627 ft. lbs. (850 Nm) @ 1,500 rpm
 Fuel Type  Diesel, direct fuel injection with electronic fuel injection pump
 Cooling  Liquid
 Rated Speed  Auto shift high to low, forward / reverse
 Rated Speed - High  3.5 mph (5.6 km/h)
 Rated Speed - Low  2 mph (3.2 km/h)
 BATTERY
 Voltage  24V negative ground
(2) low-maintenance 128 Ah (5 hr. rate) batteries
 Amps  Alternator: 50A
 HYDRAULICS
 System Relief Pressure  Standard: 4,975 psi (34.3 MPa)
Power Boost: 5,410 psi (37.3 MPa)
Pilot Control Hydraulic System: 566 psi (3.9 MPa)
 Hydraulic Cylinders  2 Boom:
Bore Diameter: 5.5 in. (140 mm)
Rod Diameter: 3.7 in. (95 mm)
Stroke: 53.9 in. (1,369 mm)
1 Arm:
Bore Diameter: 5.9 in. (150 mm)
Rod Diameter: 4.1 in. (105 mm)
Stroke: 61.7 in. (1,569 mm)
1 Bucket:
Bore Diameter: 5.3 in. (135 mm)
Rod Diameter: 3.5 in. (90 mm)
Stroke: 42.4 in. (1,078 mm)
 Pumps  2 variable displacement axial piston pumps with regulating system
Maximum capacity of 2 x 64.2 gpm (243 lpm)
1 gear design pilot control hydraulic system
Maximum capacity of 7.1 gpm (27 lpm)
 OPERATIONAL
 Arm Length  12 ft. (3.66 m)
 Arm Weight  Bare: 2,183 lbs. (990 kg)
Bucket Cylinder Linkage & Plumbing: 1,102 lbs. (500 kg)
Total: 3,285 lbs. (1,490 kg)
 Dig Depth  24 ft. 11 in. (7.58 m)
8 ft. (2.44 m) Level Bottom: 24 ft. 5 in. (7.44 m)
Vertical Straight Wall Dig Depth: 22 ft. (6.72 m)
 Bucket Reach  Height: 34 ft. 1 in. (10.39 m)
 Bucket Digging Force  Standard: 39,252 lbs. (174.6 kN)
Power Boost: 42,759 lbs. (190.2 kN)
Arm Digging Force: 24,684 lbs. (109.8 kN)
Arm Power Boost: 26,685 lbs. (118.7 kN)
 Dump Height  24 ft. 2 in. (7.39 m)
 Boom Length  20 ft. 2 in. (6.15 m)
 Boom Weight  Boom with Arm Cylinder & Plumbing: 5,719 lbs. (2,603 kg)
Hoist Cylinders (2): 558 lbs. (243 kg) ea.
Total: 6,835 lbs. (3,089 kg)
 Boom Swing Radius  Tail Swing Radius: 10 ft. 4 in. (3.16 m)
Minimum Swing Radius: 13 ft. 1 in. (4 m)
 Request a Quote
First Name:
Last Name:
Business Name:
Title:
Address:
City:
Prov/ST:
 Postal Code/Zip Code:
Phone:
Work Phone:
Email:
Preferred Color:
Purchase Timeframe:
Extended Warranty:
(Subject to Availability)

 Yes No
Additional Accessories:
Comments:
Where did you hear about us?
 Have a trade in?
Trade in Mfg: Trade in Model:
Trade in Year: Trade in KM/Miles/Hours:
Trade-In Accessories:
 Contacting out of province/state dealer?
Reason for contacting:
Delivery Method:
Photos may show optional equipment

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Category:
Manufacturer:
Model Keyword:
Year Range:
to
Stock Number:




Policies | Privacy | Terms | Site Map ©2012 Dominion Enterprises
Fleet-Farm Inc. Franklin TreeFarmer