The Case 1150K crawler dozer provides up to 118 horsepower, 418 foot-pounds of torque and 102 inches of track on ground.
The undercarriage on the 1150K is built for precise, stable and low-cost operation. Heavy-duty pins, bushings and rollers ensure long-term, hassle-free track life. Pinned equalizer beam suspension provides a smooth ride, stability and maximum traction for work on slopes, stump removal or pushing hard at low speeds – no matter what the conditions are. Available in standard, extra-long and wide-track configurations.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
1150K Series
MSRP
Request a Quote
DIMENSIONS
Length
Blade Straight with Drawbar: 16 ft. 6 in. (5.03 m) Blade Straight with Ripper: 19 ft. 7 in. (5.97 m)
Height
9 ft. 4 in. (2.83 m) to top of ROPS and cab
Width
Blade: 120 in. (3.05 m) Blade Straight: 10 ft. (3.05 m) Blade Angled: 9 ft. 3 in. (2.82 m) Over Track: 94 in. (2.39 m)
Weight
Operating: 27,858 lbs. (12,636 kg) equipped with ROPS, full fuel tank, 170 lbs. (77 kg) operator, side shield, track guides, backup alarm, horn, lights and rear retrieval hitch
Single lever control, electronic straight tracking with 2 micron, spin-on replaceable oil filter
Transmission Speed
Measured using standard track chain. Increase travel speeds by 4% and reduce drawbar pull by 4% with the optional CELT track chain.
Tracks
Track Gauge: 70 in. (1.78 m) Shoe Width: 24 in. (610 mm) Track on Ground: 102 in. (2.59 m) Area of Track on Ground: 4,896 in² (3.16 m²) Ground Pressure: 5.7 psi (39.7 kPa)
ENGINE
Engine Model
Case Family IV 667TA / EDJ
Cylinders
6
Gross Horsepower
130 hp (97 kW) @ 2,200 rpm (per SAE J1349)
Net Horsepower
118 hp (88 kW) @ 2,200 rpm (per SAE J1349)
Torque
Net: 418 ft. lbs. (567 Nm) @ 1,400 rpm Gross: 434 ft. lbs. (589 Nm) @ 1,400 rpm
Cooling
Liquid Radiator: Core Size Area: 939 in² (0.61 m²) Rows of Tubes: 4 Fan: Diameter: 26.1 in. (662 mm) Ratio: 0.9:1 Transmission Type: Oil to air Core Size: 844 in² (54,452 m²)
Bore x Stroke
4.09 x 5.2 in. (104 x 132 mm)
Displacement
409 ci (6.7 l)
Fuel Type
#2 diesel, direct fuel injection
Rated Speed
Full Load: 2,200 rpm High Idle, No Load: 2,350±50 rpm Low Idle: 900-1,100 rpm
Speed - Forward
0-6 mph (0-9.7 km/h)
Speed - Reverse
0-6 mph (0-9.7 km/h)
BATTERY
Voltage
24V system (2) 12V low-maintenance 700 cold-cranking amps @ 0° F (-18 C) battery
44 in. (1,118 mm) Lift Above Ground: 38 in. (965 mm)
Blade Capacity
3.8 yd³ (2.9 m³)
Blade Tilt
Each End (up to 8.3°): 17.3 in. (439 mm) Pitch: 55° - 60° adjustable
Dig Depth
Below Ground: 19 in. (483 mm)
Ripper Depth
19 in. (483 mm) 67.4 in. (1,711 mm) width 64.4 in. (1,635 mm) cut width
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.