| Manufacturer |
|
Case Construction |
|
|
| Model Year |
|
2010 |
|
|
| Model |
|
550H Series |
|
|
| MSRP |
|
Request a Quote
|
|
|
| DIMENSIONS | |
| Length |
|
Blade Straight with Drawbar: 13 ft. 0.3 in. (3.97 m)
Blade Straight with Ripper: 14 ft. 7.7 in. (4.46 m)
Blade Angled with Drawbar: 14 ft. 7.2 in. (4.45 m) |
|
|
| Height |
|
8 ft. 5.8 in. (2.58 m) to top of ROPS |
|
|
| Width |
|
Blade: 96 in. (2.44 m)
Blade Straight: 96 in. (2.44 m)
Blade Angled: 7 ft. 5 in. (2.26 m)
Over Track: 69 in. (1.75 m) |
|
|
| Weight |
|
Operating: 14,317 lbs. (6,494 kg) equipped with ROPS, full fuel tank, 170 lb. (77 kg) operator, drawbar, side shield, track guides, backup alarm, horn and lights (includes 500 lb. (226 kg) rear counterweight) |
|
|
| Ground Clearance |
|
13.9 in. (353 mm) with drawbar |
|
|
| Turning Radius |
|
Turning Clearance Circle, Brake Turn: 20 ft. 6 in. (6.25 m)
Turning Clearance Circle, Power Turn: 31 ft. 9 in. (9.7 m) |
|
|
| Tank Capacity |
|
Engine Oil With Filter: 11 qt. (10.4 l)
Engine Oil Without Filter: 10 qt. (9.5 l)
Engine Cooling System: 16.5 qt. (15.6 l) |
|
|
| Fuel Tank Capacity |
|
30.5 gal. (115.5 l) |
|
|
| Hydraulic Tank Capacity |
|
Reservoir: 10.3 gal. (39 l) |
|
|
| DRIVETRAIN | |
| Transmission Type |
|
Case constant-mesh modulated with 10 micron, spin-on replaceable oil filter |
|
|
| Transmission Speed |
|
Modulated 2-speed Powershift |
|
|
| Number of Speeds |
|
4 forward, 4 reverse |
|
|
| Tracks |
|
Track Gauge: 53 in. (1.35 m)
Shoe Width: 16 in. (406 mm)
Track on Ground: 78 in. (1.98 m)
Area of Track on Ground: 2,496 in² (1.61 m²)
Ground Pressure: 5.7 psi (39.3 kPa) |
|
|
| ENGINE | |
| Engine Model |
|
Case 4-390 or 4T-390 |
|
|
| Cylinders |
|
4 |
|
|
| Gross Horsepower |
|
Naturally Aspirated (per SAE J1349): 75 hp (56 kW) @ 2,200 rpm
Turbocharged: 80 hp (65 kW) @ 2,200 rpm |
|
|
| Net Horsepower |
|
Naturally Aspirated (per SAE J1349): 67 hp (50 kW) @ 2,200 rpm
Turbocharged: 70 hp (52 kW) @ 2,200 rpm |
|
|
| Torque |
|
Net: 181 ft. lbs. (245 Nm) @ 1,600 rpm naturally aspirated
220 ft. lbs. (298 Nm) @ 1,500 rpm turbocharged
Gross: 191 ft. lbs. (259 Nm) @ 1,600 rpm naturally aspirated
229 ft. lbs. (309 Nm) @ 1,500 rpm turbocharged |
|
|
| Cooling |
|
Liquid
Radiator: Core Size Area: 408 in² (0.26 m²)
Rows of Tubes: 5
Fan: Diameter: 17.7 in. (450 mm)
Ratio: 1.35:1 |
|
|
| Bore x Stroke |
|
4.02 x 4.72 in. (102 x 120 mm) |
|
|
| Displacement |
|
239 ci (3.9 l) |
|
|
| Fuel Type |
|
#2 diesel, direct fuel injection |
|
|
| Rated Speed |
|
Full Load: 2,200 rpm
High Idle, No Load: 2,420±50 rpm
Low Idle: 800-1,050 rpm |
|
|
| Speed - Forward |
|
1st: 2.5 mph (4 km/h)
2nd: 3.4 mph (5.5 km/h)
3rd: 4.2 mph (6.8 km/h)
4th: 5.8 mph (9.3 km/h) |
|
|
| Speed - Reverse |
|
1st: 2.7 mph (4.3 km/h)
2nd: 3.7 mph (5.9 km/h)
3rd: 4.6 mph (7.4 km/h)
4th: 6.4 mph (10.3 km/h) |
|
|
| BATTERY | |
| Voltage |
|
12V low-maintenance 700 cold-cranking amps @ 0° F (-18 C) |
|
|
| Amps |
|
65A |
|
|
| HYDRAULICS | |
| Std Pump Flow |
|
@ 2,500 psi (172 kPA): 21.9 gpm (82.9 lpm) @ 2,200 rpm |
|
|
| OPERATIONAL | |
| Blade Type |
|
Reversible and replaceable cutting edge |
|
|
| Blade Width |
|
8 in. (203 m)
0.625 in. (16 mm) thick |
|
|
| Blade Height |
|
33 in.(838 mm)
Lift Above Ground: 34 in. (864 mm) |
|
|
| Blade Capacity |
|
1.65 yd³ (1.26 m³) |
|
|
| Blade Tilt |
|
Each End (up to 8.3°): 14 in. (356 mm)
Pitch: 55° forward
60° rearward |
|
|
| Dig Depth |
|
Below Ground: 19.5 in. (495 mm)
Lift Speed per Second: 22.5 in. (0.57 m) |
|
|
| Ripper Depth |
|
15 in. (381 mm)
72.4 in. (1,839 mm) width
70.1 in. (1,780 mm) cut width |
|
|
Home
Specs, Quotes, Overview
100.jpg)
