The Case 1850K crawler dozer provides up to 185 horsepower (138 kilowatts), 671 foot-pounds of torque (909 newton meter) and 126 inches (3,200 millimeters) of track on ground.
The advanced hydraulics and steering make for smooth operation, whether doing heavy dozing or finish grading. With wide-open visibility and single-lever controls, the K Series dozers are easy-to-operate, high-production machines.
These new Case models will compete in upwards of 40 percent of the dozer markets, including utility construction, general construction, forestry, waste management and rental, and roads and bridges.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
1850K Series
MSRP
Request a Quote
DIMENSIONS
Length
Blade Straight with Drawbar: 216 in. (5,487 mm) Blade Straight with Ripper: 253 in. (6,420 mm)
Height
127 in. (3,226 mm) to top of ROPS 125 in. (3,175 mm) to top of exhaust
Width
Blade Straight: 134 in. (3,420 mm) Over Track: 98.8 in. (2,510 mm)
Weight
Operating: 44,269 lbs. (20,080 kg) equipped with ROPS, full fuel tank, 175 lbs. (79 kg) operator, semi U blade and 22 in. (560 mm) grousers
24V system (2) 12V low-maintenance 650 cold-cranking amps @ 0° F (-18 C) batteries
Amps
65A
HYDRAULICS
Std Pump Flow
65.8 gpm (249 lpm) @ 2,000 rpm
OPERATIONAL
Blade Type
Reversible and replaceable cutting edge
Blade Width
8 in. (203 m) 0.75 in. (19 mm) thick
Blade Height
56 in. (1,425 mm) Lift Above Ground: 43 in. (1,100 mm)
Blade Capacity
7.3 yd³ (5.6 m³)
Blade Tilt
Each End: 33 in. (838 mm) Cutting Edge: 55°
Dig Depth
Below Ground: 18.5 in. (472 mm) Lift Speed per Second: 8.3 in. (212 m)
Ripper Depth
21 in. (540 mm) 83.9 in. (2,130 mm) width 74.8 in. (1,900 mm) cut width
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.