The 1650L crawler dozer is the first model in our new L Series. It delivers breakthrough power and performance, thanks to an electronic Tier III-certified engine, an electronically controlled variable-displacement dual-path hydrostatic transmission, and an eight-roller undercarriage with a hunting tooth sprocket for precise grading.
“It's a completely new machine from the ground up,” said Jim Hughes, marketing manager. “In addition to the powerful engine and hydrostatic transmission, it features a new cab design, low-effort electronic blade control and high-performance hydraulics for increased blade speed, superior blade force and precise control.”
The six-cylinder, 6.7-liter turbocharged 1650L delivers 144 net horsepower (107 kilowatts).
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
1650L Series
MSRP
Request a Quote
DIMENSIONS
Length
Blade Straight with Drawbar: 18 ft. 7 in. (5.66 m) Blade Straight with Ripper: 21 ft. 9 in. (6.62 m)
Height
9 ft. 10 in. (2.99 m) to top of ROPS and cab
Width
Blade: 126 in. (3.2 m) Blade Straight: 10 ft. 6 in. (3.2 m) Blade Angled: 9 ft. 2 in. (2.79 m) Over Track: 98 in. (2.48 m)
Weight
Operating: 35,203 lbs. (15,965 kg) including ROPS, full fuel tank, 170 lbs. (77 kg) operator, rear retrieval hitch, track guides, back up alarm, horn and lights
Single lever control, electronic straight tracking with 2 micron, spin-on replaceable oil filter
Transmission Speed
Measured using standard track chain. Increase travel speeds by 4% and reduce drawbar pull by 4% with the optional CELT track chain.
Tracks
Track Gauge: 74 in. (1.87 m) Shoe Width: 24 in. (610 mm) Track on Ground: 120 in. (3.04 m) Area of Track on Ground: 5,767 in² (3.72 m²) Ground Pressure: 6.2 psi (42.8 kPa)
ENGINE
Engine Model
Case Family IV, 667TA / EDJ
Cylinders
6
Gross Horsepower
156 hp (116 kW) @ 2,200 rpm (per SAE J1349)
Net Horsepower
144 hp (107 kW) @ 2,200 rpm (per SAE J1349)
Torque
Net: 493 ft. lbs. (669 Nm) @ 1,400 rpm Gross: 509 ft. lbs. (690 Nm) @ 1,400 rpm
Cooling
Liquid Radiator: Core Size Area: 939 in² (0.61 m²) Rows of Tubes: 4 Fan: Diameter: 26.1 in. (662 mm) Ratio: 1.1:1 Transmission Type: Oil to air Core Size: 638 in² (4,116 cm²)
Bore x Stroke
4.09 x 5.2 in. (104 x 132 mm)
Displacement
409 ci (6.7 l)
Fuel Type
#2 diesel, direct common rail fuel injection
Rated Speed
Full Load: 2,200 rpm High Idle, No Load: 2,300±50 rpm Low Idle: 900-1,100 rpm
Speed - Forward
0-6 mph (0-9.7 km/h)
Speed - Reverse
0-6 mph (0-9.7 km/h)
BATTERY
Voltage
24V system (2) 12V low-maintenance 700 cold-cranking amps @ 0° F (-18 C)
46.5 in. (1,181 mm) Lift Above Ground: 37.4 in. (949 mm)
Blade Capacity
4.12 yd³ (3.1 m³)
Blade Tilt
Each End (up to 8.3°): 17.7 in. (449 mm) Pitch: 50° - 60° adjustable
Dig Depth
Below Ground: 19.3 in. (490 mm)
Ripper Depth
19 in. (483 mm) 67.4 in. (1,711 mm) width 64.4 in. (1,635 mm) cut width
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Home
Specs, Quotes, Overview
100.jpg)
