With available 75 net horsepower, the Case 650K Series 3 provides outstanding power in a compact and maneuverable design. This machine offers outstanding power, performance, productivity and value for you. The 650K Series 3 gives you the right combination of speed, power and weight to handle any job with ease and efficiency. For rock solid productivity, which excels in utility and rental applications, the Case 650K Series 3 consistently delivers.
GENERAL INFORMATION
Manufacturer
Case Construction
Model Year
2010
Model
650K Series 3
MSRP
Request a Quote
DIMENSIONS
Length
Blade Straight with Drawbar: 168 in. (4,276 mm) Blade Straight with Ripper: 201 in. (5,101 mm)
Height
109.2 in. (2,773 mm) to top of ROPS and cab 109.8 in. (2,788 mm) with A/C
Width
Blade: 98 in. (2,489 mm) Blade Straight: 110 in. (2,794 mm) Blade Angled: 91 in. (2,308 mm) Over Track: 73 in. (1,854 mm)
Weight
Operating: 18,200 lbs. (8,244 kg) equipped with ROPS, full fuel tank, 170 lb. (77 kg) operator, drawbar, side shield, track guides, backup alarm, horn and lights
Single lever control, electronic straight tracking with 2 micron, spin-on replaceable oil filter
Transmission Speed
Measured using standard track chain. Increase travel speeds by 4% and reduce drawbar pull by 4% with the optional CELT track chain.
Tracks
Track Gauge: 57 in. (1.45 m) Shoe Width: 16 in. (406 mm) Track on Ground (CELT): 89 in. (2.26 m) Area of Track on Ground: 2,810 in² (1.81 m²) Ground Pressure: 6.5 psi (44.6 kPa)
ENGINE
Engine Model
Case Family III 445T/M2, Tier II certified
Cylinders
4
Gross Horsepower
80 hp (59.7 kW) @ 2,000 rpm (per SAE J1349)
Net Horsepower
74.8 hp (55.8 kW) @ 2,000 rpm (per SAE J1349)
Torque
Net: 262 ft. lbs. (355 Nm) @ 1,400 rpm Gross: 265 ft. lbs. (360 Nm) @ 1,400 rpm
Cooling
Liquid Radiator: Core Size Area: 486 in² (0.31 m²) Rows of Tubes: 6 Fan: Diameter: 21.6 in. (550 mm) Ratio: 0.875:1 Transmission Type: Oil to water Core Size: 185.5 in² (1,197 cm²)
Bore x Stroke
4.1 x 5.2 in. (104 x 132 mm)
Displacement
274 ci (4.5 l)
Fuel Type
#2 diesel, direct fuel injection
Rated Speed
Full Load: 2,000 rpm High Idle, No Load: 2,220±50 rpm Low Idle: 800-1,050 rpm
Speed - Forward
0-6 mph (0-9.7 km/h)
Speed - Reverse
0-6 mph (0-9.7 km/h)
BATTERY
Voltage
12V low-maintenance 650 cold-cranking amps @ 0° F (-18 C)
36 in. (914 mm) Lift Above Ground: 34.4 in. (874 mm)
Blade Capacity
2 yd³ (1.53 m³)
Blade Tilt
Each End (up to 8.3°): 14.2 in. (361 mm) Pitch: 52° forward 60° rearward
Dig Depth
Below Ground: 19 in. (483 mm) Lift Speed per Second: 18 in. (457 m)
Ripper Depth
14 in. (356 mm) 72.4 in. (1,839 mm) width 70.1 in. (1,780 mm) cut width
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Home
Specs, Quotes, Overview
100.jpg)
